Tube spinning is an effective plastic-forming technology for forming light-weight, high-precision and high-reliability components in high-tech fields, such as aviation and aerospace. However, cracks commonly occur in tube spinning due to the complexity of stress state, which severely restricts the improvement of the forming quality and forming limit of components. In this study, a finite elemen...

.hot metal gas forming of tubes can be used in various industries such as automotive and aerospace industries. in this process tube is formed at elevated temperatures, by using gas instead of fluid pressure. lower required pressure and low power are its advantages in comparison to hydroforming process. in this paper, a hot metal gas bulging process of an aluminum alloy tube has been investigate...

Abstract: The supersolidus liquid phase sintering characteristics of commercial 2024 pre-alloyed powder was studied at different sintering conditions. Pre-alloyed 2024 aluminum alloy powder was produced via air atomizing process with particle size of less than 100 µm. The solidus and liquidus temperatures of the produced alloy were determined using differential thermal analysis (DTA). The sinte...

This study evaluated the performance of aluminum-copper alloy filtration, without the original aluminum filter, for dental radiography in terms of x-ray energy spectrum, air kerma rate and image quality. Comparisons of various thicknesses of aluminum-copper alloy in three different percentages were made with aluminum filtration. Tests were conducted on an intra-oral dental x-ray machine and wer...

In this study, the effects of heat treatment of aluminum alloy on the tube bending process were investigated in the rotary draw bending process. As two experimental and numerical simulation methods were used to determine the wall-thinning, ovality, and spring back for extruded, annealed, and aged AA6063 aluminum alloy tubes in different bending angles and bend radii. Numerical simulations were ...

.Hot metal gas forming of tubes can be used in various industries such as automotive and aerospace industries. In this process tube is formed at elevated temperatures, by using gas instead of fluid pressure. Lower required pressure and low power are its advantages in comparison to hydroforming process. In this paper, a hot metal gas bulging process of an aluminum alloy tube has been investigate...

To maximize the controllable energy absorption of corrugation troughs as observed in the single sided corrugated (SSC) tube, we proposed and tested a new structure design, i.e., double-sided corrugated (DSC) tube made of Al 6060-T6 aluminum alloy or CF1263 carbon/epoxy composite. Finite element models were developed to test the mechanical advantage of the DSC tube in comparison with both SSC an...

This paper deeply analyzes the main factors of the dissolved problems arising in the process of aluminum alloy hard anodizing, combined with the specific problems occurring in production practice, introduces in detail the method and thought to analyze and investigate the causes of dissolving, and puts forward targeted improvement technology. This paper is practically instructive and significant...

Aluminum foam is usually used as the core of composite materials by combining it with dense materials, such as in Al foam core sandwich panels and Al-foam-filled tubes, owing to its low tensile and bending strengths. In this study, all-Al foam-filled tubes consisting of ADC12 Al-Si-Cu die-cast aluminum alloy foam and a dense A1050 commercially pure Al tube with metal bonding were fabricated by ...